Fritsch Milling and Sizing

Pulverisette 15 Cutting Mill

Cutting Mill


Working principle cutting
Optimal for material type medium-hard, soft, fibrous samples
Cutting tools rotor with straight cutting edges and fixed knives
Materials of the cutting tools tool steel, stainless steel 316L, chromium-free tool steel, chromium-free steel DC01
Max. feed size (depending on the material and funnel) 70 x 70 mm
Max. throughput (depending on the material and sieve size) 50 l/h
Final fineness (depends on sieve insert – additional sieve sizes available) 0.25 – 20 mm
Feeding batchwise/continuous
Rotor speed 2800/3400 rpm*
Rotor peripheral speed 14.92/17.9 m/s*
Drive Up to 2.1 kW three-phase motor or single phase motor
Electrical Details/torque 400 V/3~, 50 Hz, 1790 watt, 5.5 Nm
Emission sound pressure level at the workplace according to DIN EN ISO 3746 (depending on the material to be ground, rotor and sieve insert used) LpAd = 78 dB
Weight 32 kg
Dimensions (W x D x H) table-mounting or on stand 42 x 48 x 69 cm
*depending voltage and frequency
The Cutting Mill PULVERISETTE 15 is also available in the following voltages:
Electrical details / Torque
for 400 V/3~, 50 Hz, 1790 watt, 5.5 Nm
for 200-240 V/1~, 50 Hz, 2150 watt, 4.8 Nm
for 200 V/3~, 60 Hz, 2140 watt, 5.5 Nm
for 100-120 V/1~, 60 Hz, 1900 watt, 3 Nm
The PULVERISETTE 15 with voltage of “/3~” can only be operated on a three-phase supply network.
The three-phase version “/3~” is definitely preferable instead of a single-phase version “/1~”, because the three-phase version obtains more power, better effectiveness and greater energy efficiency.
Other voltages on request!

USA Headquarters
FRITSCH Milling and Sizing, Inc.

57 Grant Drive, Suite G
Pittsboro, NC, 27312

Phone: + 1 919 229 0599
Email: info@fritsch-us.com

INSTRUMENT SUPPORT SERVICE

Our technical service team is at your disposal for maintenance, repair, calibration of laboratory instruments and ordering original spare parts. We are also available worldwide for warranty extensions and all other questions. Would you like to send your instrument for testing or maintenance to us? Please visit the Service Form page and complete the form for your submission. US Service Technician Reggie Piard 919-229-0599 x111
Skip to content