Fritsch Milling and Sizing

Feeding / Dividing

REPRESENTATIVE SAMPLE PREPARATION - THE FOUNDATION FOR EVERY PRECISE ANALYSIS!

The instruments for sample dividing and feeding will make your work more efficient and guarantee a representative sample preparation. The Rotary Cone Sample Divider LABORETTE 27 creates the optimal basis for reliable analysis of a representative sample. The Vibratory Feeders LABORETTE 24 are ideal for efficient feeding of mills, sample dividers, mixers, sieve shakers, balances and other laboratory instruments. Select the right product for your application below:
csm_LABORETTE-27_339914ab2c

LABORETTE 27

Rotary Cone Sample Divider

Guaranteed representative subsamples

A perfect sample preparation is the indispensable foundation for every analysis – because any errors will be reflected in the results later on. Therefore the reliable creation of guaranteed representative subsamples plays an absolutely central role. The FRITSCH Rotary Cone Sample Divider LABORETTE 27 offers the ideal conditions: it is the only sample divider on the market dividing your samples with up to 3,000 dividing steps per minute centred over a rotating dividing cone into up to 30 separate channels. Each individual sample with identical chemical and physical properties – and with 99.9 % accuracy for many more sample materials than any other similar method. The best sample division, possible today.

IDEAL FOR:
Representative Sample Preparation – The Foundation for Every Precise Analysis

csm_L-24_V_9550c26964

LABORETTE 24

Vibratory Feeder - with V-shaped channel

Reliable automatic feeding

The Vibratory Feeder LABORETTE 24 is ideal for automatic, uniform feeding of free-flowing materials into sample dividers, mills or mixers in your laboratory. The vibration, which is controlled by a microprocessor, conveys the sample material out of the funnel over the V-shaped stainless steel channel into the respective equipment. The flow rate can be individually adjusted; the vibration amplitude is precisely controlled – for absolute uniform feed of even smallest quantities. Safe and reliable.
The Vibratory Feeder LABORETTE with a V-shaped feeder channel made of stainless steel is ideal for a narrow directed material feed between 1 g/min and 1,500 g/min.

IDEAL FOR:
Narrow, Directed Sample Discharge

csm_L-24_U_059d56fae5

LABORETTE 24

Vibratory Feeder - with U-shaped channel

Reliable automatic feeding

The Vibratory Feeder LABORETTE 24 is ideal for automatic, uniform feeding of free-flowing materials into sample dividers, mills or mixers in your laboratory. The vibration, which is controlled by a microprocessor, conveys the sample material out of the funnel over the U-shaped stainless steel channel into the respective equipment. The flow rate can be individually adjusted; the vibration amplitude is precisely controlled – for absolute uniform feed of even smallest quantities. Safe and reliable.
The Vibratory Feeder LABORETTE with an U-shaped feeder channel made of stainless steel is ideal for uniform, wide material feed between 5 g/min and 2,500 g/min.

IDEAL FOR:
Uniform, Wide Sample Feeding

USA Headquarters
FRITSCH Milling and Sizing, Inc.

57 Grant Drive, Suite G
Pittsboro, NC, 27312

Phone + 1 919 229 0599
Email: info@fritsch-us.com

Send us your sample. We conduct a sample grinding and recommend the right device for your application.

FREE SAMPLE SUBMISSION AND APPLICATION REVIEW

Sent us a sample submission to find the perfect instrument configuration for your application.

FRITSCH offers a wide selection of high-performance mills, particle size and shape analysis instruments in various product groups for every application and every specific need: Planetary Mills, Ball Mills, Cutting Mills, Knife Mill, Rotor and Beater Mills, Jaw Crushers, Disk Mills, Mortar Grinders, Laser Particle Analysis, Dynamic Image Analysis, Sieving, Sample Feeding & Dividing.