PULVERISETTE 19
Universal Cutting Mill
| Working principle | Cutting |
| Optimal for material type | medium-hard, soft, brittle, tough, fibrous / hard tough-elastic, temperature-sensitive samples |
| Cutting tools | rotor with V-cutting edges and fixed knives, rotor with notched edges, rotor with straight cutting edges and fixed knives, disk milling cutter rotor with indexable inserts and fixed knives |
| Materials of the cutting tools | hardened stainless steel, hardmetal tungsten carbide, chromium-free tool steel, stainless steel 316L, chromium-free steel DC01 |
| Max. feed size (depending on the material and funnel) | 70 x 80 mm |
| Max. throughput (depending on the material and sieve size) | 60 l/h |
| Final fineness (depends on sieve cassette – additional sieve sizes available) | 0.2 – 10 mm |
| Feeding | batchwise/continuous |
| Variable rotor speed (depending on voltage and frequency) | 300 – 3000 rpm / 50-700 rpm |
| Rotor peripheral speed | 1.57 – 15.7 m/s / 0.26-3.66 m/s |
| Drive | Up to 5 kW three-phase motor with frequency converter and flywheel mass for stabilizing the drive torque / Up to 2.8 kW three-phase motor with frequency converter and flywheel mass for stabilizing the drive torque |
| Electrical Details/torque | 380-460 V/3~, 50-60 Hz, 5000-watt, 30 Nm / 380-460 V/3~, 50-60 Hz, 2800 watt, 67Nm |
| Emission sound pressure level at the workplace according to DIN EN ISO 3746 (depending on the material to be ground, rotor and sieve insert used) | LpAd = 78 dB / LpAd = 75 dB |
| Weight | 79 kg / 83 kg |
| Dimensions (W x D x H) | table mounted or on support frame 44 x 79 x 56 cm |
| The Universal Cutting Mill PULVERISETTE 19 with variable rotational speed 300-3000 rpm is available in the following voltages and versions / 50-700 rpm | |
| Other Voltage Options | Electrical details/ Torque |
| (three-phase motor with frequency converter and flywheel mass for stabilizing the drive torque) | |
| 380-460 V/3~, 50-60 Hz, 5000 watt, 30 Nm / 380-460 V/3~, 50-60 Hz, 2800 watt, 67 Nm | |
| 200-240 V/1~, 50-60 Hz, 2350 watt, 10 Nm / 200-240 V/1~, 50-60 Hz, 2350 watt, 26 Nm | |
| 100-120 V/1~, 50-60 Hz, 1725 watt, 8 Nm / 100-120 V/1~, 50-60 Hz, 1725 watt, 24 Nm | |
| The PULVERISETTE 19 with voltage of “/3~”can only be operated on a three-phase supply network. | |
| Despite the frequency converter, the three-phase version “/3~” is definitely preferable instead of a single-phase version “/1~”, because the three-phase version achieves a higher torque mass and pulling power. | |
| The single-phase versions of the Universal Cutting Mills PULVERISETTE 19 also have an especially maintenance-free three-phase motor with a frequency converter. | |
USA Headquarters
FRITSCH Milling and Sizing, Inc.
57 Grant Drive, Suite G
Pittsboro, NC, 27312
Phone: + 1 919 229 0599
Email: info@fritsch-us.com
INSTRUMENT SUPPORT SERVICE
Our technical service team is at your disposal for maintenance, repair, calibration of laboratory instruments and ordering original spare parts.
We are also available worldwide for warranty extensions and all other questions.
Would you like to send your instrument for testing or maintenance to us? Please visit the Service Form page and complete the form for your submission.
US Service Technician Reggie Piard 919-229-0599 x111